Different types of iTunes Errors of iPhone,iPod,iPad with solution

Most of the iPhone, iPad, iPod, or iTunes Errors found at Apple’s Knowledge Base. Here is the list of iTunes errors that could appear when you restore the iPhone, iPad and iPod Touch using iTunes. If the problem still exists after you view this post, please find more details solutions in this post Detailed solutions for Apple iPhone, iPad, iPod Touch iTunes Errors.  And 3uTools can help you restore or flash iDevices more effectively.

Error 1

Unable to downgrade. Try to change the USB port (the back one of chassis is better) and restart the computer.
The installed version of the iTunes may also be too old. Update the iTunes.

Error -1

The error occurs when one uses the “last-ditch” method for preventing baseband updates on the iPhone. The baseband does not get updated by using this method. Use the Fix-Recovery to kick it out of recovery mode.

Error 2

Sn0wbreeze 1.6 Custom Firmware has an ASR patch problem. Use sn0wbreeze 1.7 or PwnageTool. The device isn’t bootable.

Error 6

Not enter to the downgrading mode, change the USB port (the back one of chassis is better) and restart the computer.

Error 9 

Due to the asr being patched, the SHA signature is automatically changed and after being resigned the kernel will refuse to use it. Therefore proper kernel patches are required. If necessary kernel patches are not applied, then it will fail to load asr and error 9 would occur during restore.
Rebooting your PC may resolve this issue. Also, it can be a connection issue.

Error 10

LLB is missing from the IPSW. The device cannot be booted up. The trick to skip the baseband for update no longer works.

Error 11

removed the bbfw file in the firmware folder of an unzipped IPSW.

Error 13

Occurs when you want to install the beta firmware with the iTunes for Windows (actively blocked by Apple; beta users are developers and therefore must have a Mac).
Error 13 may also signify a USB problem. Please check the USB connection and try other direct ports or maybe the USB cable is an older one. The device isn’t bootable.

Error 14

Custom firmware update fails (PwnageTool). You have to restore a device with the custom firmware. Update to a custom firmware isn’t working. The device isn’t bootable. 2
USB Problem. Please check the USB connection and try other direct ports or maybe the USB cable is an older one. The device isn’t bootable.

Error 17

Custom firmware update fails (sn0wbreeze). You have to restore the device with a custom firmware. Update to a custom firmware isn’t working.

Error 18

This will occurs when the media library on the device is corrupt and cannot be modified or updated. By Updating to the latest version of iTunes and then restoring should resolve this issue.

Error 20

reportedly happens during the failed downgrade attempts, Some have seen success afterward by doing the downgrade from DFU mode instead of the normal Recovery mode.

Here is the list of the various iTunes errors that could appear when you restore iPhone, iPad and iPod Touch using iTunes. Error when using Sauriks server for a restore with iOS 5.x in the recovery mode at least on an A5 device. This error can also happen when you are trying to restore an iPod with hardware dfu. Use iREB r5 to solve this. or You are trying to update to the beta firmware without UDID activation.

Error 23

the baseband Communication error (Hardware), Most probably the Baseband chip is faulty.

Error 26

False version of the NOR flash firmware. Use the correct sn0wbreeze version.

Error 27

modified the restore. Pits so it would flash and also exchanged restore the Ram-Disk and kernel-cache. Restore the original iOS.

Error 28

The problem is a bad dock connector on the iPhone. Must change the connector. If you have tried about to almost everything, reset the logic board leave uncharged for 2-3 days or remove the battery for an hour. It doesn’t work, the flash memory is damage.

Error 29

You might need to change the battery.

Error 31

the DFU Loop, Sometimes during the restore with your messed-up IPSW, iTunes will return error 31.then this is what’s referred to as a DFU loop. The one and the only solution are to restore the working firmware.

Error 34

The hard disk is run out of space when trying to download. Clear space and then continue downloading.

Error -35

An error occurred when downloading songs purchased on the iTunes, See Apple’s KB article.

Error 37

the iPod touch 2G LLB patched with the 0x24000 Segment Overflow was used on an iPhone 3GS custom firmware. Known on damaged bundles from unofficial Pwnage-Tool distributions or bundles.

Error 40

Hacktivation bug in Sn0wbreeze, Use update one…

Error -50

Delete Storm Vedio, QuickTime, iTunes, then reinstall iTunes. See also Apple’s KB article.

Error 1002

Are you restoring to the stock apple firmware or a custom pwn firmware? Either way, then make sure that you are in DFU mode first.

Error 1004

this is the caused by a failure to match the Baseband Nonce currently in memory to the Nonce returned in the Baseband-Firmware SHSH blob. This is the normal part of iPhone 4 local restores via Tiny-Umbrella.

Error 1011

the file iTunesMobileDevice.dll is damaged or updated.

Error 1013

Restart the computer; change the computer; reinstall the system, if the iPhone is always in restoring mode: XP users can jump from restoring mode with ibus; MAC users can use independence. (Usually on the iPhone with 1.0.2 firmware downgraded from the 1.1.1).

Error 1014

this error is the down to iTunes not liking your USB ports on your computer. Use the different USB slot or a different computer if it is possible. That is the easiest fix!

Error 1015

Restart computer; change computer; reinstall the system, if the iPhone is always is in restoring mode: XP users can jump from restoring mode with ibus; MAC users can use iNdependence. (Usually on the iPhone with 1.1.1 firmware downgraded from the 1.1.2) Baseband firmware on the IPSW is higher than the baseband firmware on the iPad/iPhone.

Error 1050

Bad response from the gs.apple.com OR need iREB for preparing the device for restoring to custom IPSW.

Error 1394

When the Spirit2Pwn flashes parts of the boot chain on iOS 4, then the device may crash into DFU Mode.

Error 1413

Restart computer; change USB port; reinstall system. See also Apple’s KB article.

Error 1415

Restart computer; change USB port; reinstall system.

Error 1417

Restart computer; change USB port; reinstall system.

Error 1418

Restart computer; change USB port; reinstall system.

Error 1428

Restart computer; change USB port; reinstall system.

Error 1600

the Custom firmware can’t be restored on a device with DFU Mode. Please Use the Recovery Mode.

Error 1601

Completely remove the iTunes and the Apple Mobile Device support and then after reinstalling iTunes.

Error 1602

Restart computer; change computer; reinstall system.

Error 1603

False kernel-cache patch. Known on the damaged bundles from the unofficial PwnageTool distributions or bundles. See also Apple KB article.

Error 1604

the Device was not pwned (the signature checks were not blocked). And Custom firmware can’t be restored.

Error 1611

The iTunes tried to enter the Restore Mode, but the device is turned back to the Recovery Mode.

Error 1618

Missing system files or corrupt data in iTunes installation. Try to uninstall iTunes, restart the computer, install again. This error also occurs for the iTunes in Windows 8 for the reasons currently unknown.

Error 1619 

the iTunes is too old and couldn’t read the iPhone in Recovery or DFU Mode. Please update the iTunes and try it again.

Error 1644

IPSW was moved during prepare with iTunes. Try it again and don’t move the IPSW.

Error 1646

the iTunes expected the device to be in a different state (Example: booted into the iOS rather than jumping to iBEC).

Error 2001

The Mac OS X kernel extension “IOUSBFamily” that was bundled with the late 2008 / early 2009 Mac-Books, has a bug where it fails to properly recognize an iDevice in DFU Mode. It can be resolved by the updating to 10.5.7 (or later), or by using the USB hub.

Error 2002

the iTunes can’t connect because of another program is using it or it’s disconnected during the Apple Server check.

Error 2003

the Connection problem; change USB cable and check the USB port.

Error 2005

Problem connecting. Probably a hardware failure.
Somebody reported that the reinstalling the USB drivers can fix the problem.

Error 2006

Try to Replace the USB cable with a newer one and/or disconnect all other USB devices, after that retry.

Error 2009

remove all the USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer and try to restore.

Error 3XXX

iTunes can’t connect to gs.apple.com. Maybe Port 80 and Port 443 is blocked. Open it on your router.

Error 3002

Update to an older firmware isn’t working, because the Apple is no longer handing out SHSHs for the device/firmware combination.

Error 3004

when No internet connection during the firmware restores.

Error 3014

False edited hosts. The SHSH request couldn’t be completed. Then, No connection to the Apple Server, Sauriks Server or local-host.

Error 3123

something dealing with movie rentals.

Error 3194

the Right-click on QuickTimePlayer.exe then choose the Properties from the shortcut menu then click on the Compatibility tab. Deselect the checkbox labeled as “Run this program in compatibility mode for…

Error 3194

it is Occurs when trying to install an old firmware and Apple’s server disallows the installation. The only solution is to have the SHSH backup and modify the hosts file to point to Saurik’s Cydia Server where they are backed up (or localhost if you have it yourself).

Error 3195

when the “An internal error occurred.” then it is Missing SHSH for the firmware. Maybe the same as the “This device isn’t eligible for the requested build.” but with a cache error.

Error -3198

Error downloading, try again. Or this device is not eligible for a requested build.

Error 3200 

You keep trying to update to iOS 5, when in fact, the IPSW file has only a Restore Ram-disk.

Error -3259

Connection timeout, try again.

Error -5000

there is some problem with the various permissions of the Mobile Application folder. The App you’ve tried to download in the iTunes couldn’t be saved.

Error 9008

Error downloading, try again.

Errors 9800

Set exact date, restart the computer. See also Apple’s KB article

Error 9808

Computer system time incorrect.

Error 9812

Check the system time, reset the Internet connection, then update root certificates.

Errors 9814 

Set exact date, restart the computer. See also Apple’s KB article.

Errors 9815

Set exact date, restart the computer. See also Apple’s KB article.

Error 9843

This error will happen if you are logged out, try to download something from the iTunes store and if you click on “Download” and enter an account, which doesn’t have this article, this error will occur.

Error 11222

the internet options Connections tab Click LAN Settings uncheck the “use a proxy server

Error 11556

when you’re trying to access a section or a functionality that is not available in your country, for example, i-Cloud in some countries.

Error 13019

it seems to be an issue with syncing media to the device. It only seems to happen on jail-broken devices. Then create the new user, try syncing with the new user’s library.
Need to restore the device…

Error 20000

it is caused by a custom theme pack on your Windows. Then Use the default Theme.

Error 20008 

This happened on the Mac with Tiny-Umbrella running before restoring a firmware to the Apple TV.

0xE8000001

The device was suddenly unplugged. iTunes couldn’t connect with the device. Try it again.

0xE8000022

Error in your firmware files. Restore.

0xE8008001

IPA signature verification failed.

0xE800003D

false permissions in the Carrier Bundle folder. Then Restore, update or fix the permissions from the carrier bundle to update the carrier settings via iTunes.

0xE800006B

The device was suddenly unplugged. iTunes couldn’t connect with the device. Try it again.

0xE8000065

sn0wbreeze custom firmware error on a USB connection. after that Unplug the device, reboot it and plug it in again.

Related Content